Modifications apportées à l'étape #2
Modifié par Walter Galan —
- Avant
- Après
- Inchangé
Lignes de l'étape
| [* black] Using the flat end of a spudger, pry the left speaker out of its socket on the front bezel. |
| [* black] De-route the speaker cable along the top edge of the screen. |
| [* icon_caution] Work carefully and slowly, holding onto the wire and not the speaker itself. The solder joints may break if pulled on too hard. |
| [* black] In the same manner as described above, remove the right speaker from its socket on the front bezel. |
| [* black] In the same manner as described above, remove the right speaker from its socket on the front bezel. |
| [* black] Place both speakers on the back of the upper LCD. |