Aller au contenu principal

Modifications apportées à l'étape #8

Modifié par Walter Galan

Validation en attente

Avant
Après
Inchangé

Lignes de l'étape

[* black] Lift the left side of the front bezel away from the upper case.
-[* icon_note] Do not lift too far, or else the hinge pin will break. Only lift enough to clear the LED compartment, ~1".
+[* icon_note] Do not lift too far, or else the hinge pin will break. Only lift enough to clear the LED compartment, about 1".
[* black] Pull the front bezel to the left, separating the front bezel from the upper case.
[* icon_caution] Do not attempt to fully separate the two halves yet. There are still ribbon cables running through the upper case.