Historique de l'étape n° 2 de Digitac Jazz Ultratab C725 Charging Port Replacement

Modifications apportées à l'étape #2

Modifié par Savannah Brazzeal — 17 févr. 2015

Modification approuvée par Savannah Brazzeal

+	[* black] Flip your device so that the long side without the buttons is facing you.
+	[* black] Insert the Plastic Opening Tool between the silver back plate and the screen about 1 inch from corner of the device on either side.
+	[* black] Jimmy the Plastic Opening Tool until the screen unsnaps from the back plate.
+	[* black] Work your way down the edge of the device, popping out all 4 locations where the screen snaps into the silver back plate.
+	[* black] Go around the corners with the Plastic Opening Tool and unsnap additional snap-in locations as necessary.
+	[* icon_caution] Once the screen is loose, pull it towards you then lift it off to prevent damage to the buttons on the other side of the device.