| + | [* black] Flip your device so that the long side without the buttons is facing you. |
|---|
| + | [* black] Insert the Plastic Opening Tool between the silver back plate and the screen about 1 inch from corner of the device on either side. |
|---|
| + | [* black] Jimmy the Plastic Opening Tool until the screen unsnaps from the back plate. |
|---|
| + | [* black] Work your way down the edge of the device, popping out all 4 locations where the screen snaps into the silver back plate. |
|---|
| + | [* black] Go around the corners with the Plastic Opening Tool and unsnap additional snap-in locations as necessary. |
|---|
| + | [* icon_caution] Once the screen is loose, pull it towards you then lift it off to prevent damage to the buttons on the other side of the device. |
|---|