Réparez vos affaires Communauté Boutique

Modifications apportées à l'étape #1

Modifié par Elizabeth Kamine —

Modification approuvée par Elizabeth Kamine

Avant
Après
Inchangé

Lignes de l'étape

-[* red] Using a Phillips #000 Precision Screw Driver, remove both 4.5 mm screws holding the bottom into place.
+[* red] Using a Phillips #000 Precision Screwdriver, remove both 4.5 mm screws holding the bottom into place.
[* orange] Remove both 4.5 mm screws holding the side into place.
-[* yellow] Also be sure to remove the 4.5 mm screw underneath the A/V flap.
-[* green] Finally, remove the 4.0 mm screw on the left-side wrist strap loop.
+[* yellow] Remove the 4.5 mm screw underneath the A/V flap.
+[* green] Remove the 4.0 mm screw on the left-side wrist strap loop.