Modifications apportées à l'étape #1
Modifié par Elizabeth Kamine —
Modification approuvée par Elizabeth Kamine
- Avant
- Après
- Inchangé
Lignes de l'étape
| - | [* icon_reminder] This step involves a lot of screws! To ensure you can reassemble your device properly, keep track of the screws and their corresponding locations. |
|---|---|
| [* icon_note] Use a Phillips #000 Precision Screwdriver for all of the following steps. | |
| [* red] Remove both 4.5 mm screws holding the bottom into place. | |
| [* orange] Remove both 4.5 mm screws holding the side into place. | |
| [* yellow] Remove the 4.5 mm screw underneath the A/V flap. | |
| [* green] Remove the 4.0 mm screw on the left-side wrist strap loop. |