Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Pièces & Outils

Modifications apportées à l'étape #1

Modifié par Christopher Wakamatsu

Validation en attente

Avant
Après
Inchangé

Lignes de l'étape

[* icon_reminder] Check that all the rest of the orange cables are removed from the logic board.
[* red] Remove the two screws on the top part of the camera on the back side.
[* icon_caution] This will
(This will release the top layer of the camera.camera)
[* icon_caution]
Pull the top off slowly butbecause it is still attached.
[* red] Remove the two screws on the top part of the camera on the back side.
[* icon_caution] This will
(This will release the top layer of the camera.camera)
[* icon_caution]
Pull the top off slowly butbecause it is still attached.