Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Pièces & Outils

Modifications apportées à l'étape #1

Modifié par Eddie Lo

Validation en attente

Avant
Après
Inchangé

Lignes de l'étape

[* black] Verify that the rest of the orange cables are removed from the logic board.
[* red] Remove the two screws on the topupper part of the camera on the back side. (This will release the top layer of the camera)
[* black] Verify that the rest of the orange cables are removed from the logic board.
[* red] Remove the two screws on the topupper part of the camera on the back side. (This will release the top layer of the camera)
[* icon_caution] Pull the top off slowly because it is still attached.