Aller au contenu principal

Modifications apportées à l'étape #5

Modifié par Ben Hirsch

Validation en attente

Supprimé(e)
Ajouté(e)
Inchangé

Lignes de l'étape

[* black] Remove the six screws underneath the stoppers. There are four on topthree clasps holding the camera down. Gingerly lift the camera board up, being careful not to snap the board, clasps, or vertical plastic pins (inside the gold-colored rings). The metal tabs to the left and two on bottom.right of the camera (for the LCD) are sharp, watch your fingers!
[* black] Remove the six screws underneath the stoppers. There are four on topthree clasps holding the camera down. Gingerly lift the camera board up, being careful not to snap the board, clasps, or vertical plastic pins (inside the gold-colored rings). The metal tabs to the left and two on bottom.right of the camera (for the LCD) are sharp, watch your fingers!

Image 2

Aucune image précédente

Ajouté(e)