Modifications apportées à l'étape #12
Modifié par Jameson Shockley —
Modification approuvée par Jameson Shockley
- Avant
- Après
- Inchangé
Lignes de l'étape
| [* red] Next, use the spudger to remove the pictured ribbon from the ZIF connector. | |
| - | [* icon_note] Alternate on both sides of ribbon cable to remove evenly from the ZIF connector every time you use a spudger. |
| - | [* icon_caution] Be careful not to rip the ribbon cable out of the ZIF connector while removing. |
| + | [* icon_note] Apply pressure evenly between each side of the ribbon cable to avoid tearing the cable. |