Modifications apportées à l'étape #13
Modifié par Jameson Shockley —
Modification approuvée par Jameson Shockley
- Avant
- Après
- Inchangé
Lignes de l'étape
| [* red] Next, use the spudger to remove the green ribbon from the attached ZIF connector. | |
| - | [* icon_note] Alternate on both sides of ribbon cable to remove evenly from the ZIF connector every time you use a spudger. |
| - | [* icon_caution] Be careful not to rip the ribbon cable out of the ZIF connector while removing. |
| + | [* icon_note] Due to the size of the cable, it is very important to be gentle with the cable when removing it from the connector. |