Aller au contenu principal

Modifications apportées à l'étape #8

Modifié par Jameson Shockley

Modification approuvée par Jameson Shockley

Avant
Après
Inchangé

Lignes de l'étape

-[* red] Use the spudger to unclip both wires from underneath the shutter button and settings dial housing unit.
+[* red] Use the spudger to carefully unclip both wires from underneath the shutter button and the dial housing unit.
[* icon_caution] Be careful not apply too much force on wires with spudger because you may rip them off.
+[* icon_caution] Make a note of which wire goes where. Putting the wires back in the wrong spot may cause damage to the camera.