Historique de l'étape n° 10 de Canon Powershot A720 IS Motherboard Replacement

Modifications apportées à l'étape #10

Modifié par Jameson Shockley — 15 sept. 2021

Modification approuvée par Jameson Shockley

	[* black] Use the plastic opening tool to begin separating the user button circuit board from the shutter button and settings dial housing unit.
-	[* red] Carefully disconnect the ribbon cable that is attached to the user buttons circuit board ~~away~~ from the ZIF connector that is attached to the motherboard with your thumb and index finger. Get as close to the ZIF connector as possible without touching the motherboard.
-	[* icon_caution] Be careful not the rip the ribbon cable out of the ZIF connector when removing.
+	[* red] Carefully disconnect the ribbon cable that is attached to the user buttons circuit board from the ZIF connector that is attached to the motherboard with your thumb and index finger. Get as close to the ZIF connector as possible without touching the motherboard.
+	[* icon_caution] Be careful not to the rip the ribbon cable out of the ZIF connector when removing.
	[* black] Remove the user button circuit board.
+	[* icon_caution] When handling a circuit board, always hold it by the sides, the oils in your hands can be harmful to the board.