Historique de l'étape n° 15 de Canon Powershot A720 IS Motherboard Replacement

Modifications apportées à l'étape #15

Modifié par Jameson Shockley — 15 sept. 2021

Modification approuvée par Jameson Shockley

	[* black] After all of ribbons have been disconnected, gently lift the motherboard to expose the ribbon cable that connects the motherboard to the lens.
-	[* red] Use the spudger to remove the the ribbon cable attached to the motherboard. Be sure to alternate both sides of ribbon cable to evenly remove.
-	[* icon_caution] ~~Be careful not to rip the ribbon cable out~~ from the ~~ZIF connector the ribbon cable is attached to~~.
+	[* red] Use the spudger to remove the the ribbon cable attached to the motherboard. Be sure to alternate pressure to both sides of ribbon cable to evenly remove.
+	[* icon_caution] Double check that all cables are disconnected and free from the board.