Historique de l'étape n° 16 de Canon Powershot A720 IS Motherboard Replacement

Modifications apportées à l'étape #16

Modifié par Jamie — 28 févr. 2015

Modification approuvée par Jamie

-	[* red] ~~Use~~ the ~~screwdriver to remove the 30mm Phillips screws~~ from the ~~lens metal frame~~.
+	[* red] Be careful not to rip the ribbon cable out from the ZIF connector the ribbon cable is attached to.
	[* red] Turn the camera over so the bottom is exposed to remove the 30 mm Phillips head screw to disassemble the battery housing unit from the camera.