Réparez vos affaires Communauté Boutique

Modifications apportées à l'étape #2

Modifié par Ellen Shelton —

Modification approuvée par Ellen Shelton

Avant
Après
Inchangé

Lignes de l'étape

-[* black] Place the camera down so that the lens is facing up.
-[* red] Next, use the Phillips#00 precision screwdriver to unscrew the innermost 4 mm Phillips head screw. This will remove the door from the camera.
-[* orange] After you remove the battery compartment door from the camera, place it on a flat surface and so that the battery contact is facing up and remove the other two 4 mm Phillips head screws.
-[* black] Then, carefully slide off the battery contact from the door.
+[* black] Place the camera on a flat surface so that the lens is facing up.
+[* red] Use the Phillips#00 precision screwdriver to remove the innermost 4 mm Phillips head screw. Remove the door from the camera.
+[* orange] Place the door on a flat surface with the battery contact facing up. Remove the two 4 mm Phillips head screws.
+[* black] Slide the battery contact from the door.