Modifications apportées à l'étape #3
Modifié par Andrew Saunders —
Modification approuvée par Andrew Saunders
- Avant
- Après
- Inchangé
Lignes de l'étape
| - | [* black] Use a 7/16 |
|---|---|
| + | [* black] Use a socket wrench with a 7/16" hex bit or 7/16" wrench to remove the two remaining 75mm bolts. |
| [* icon_note] Make sure not to lose the metal bar linking the two bolts. | |
| - | [* black] After removing the 75mm bolts, remove the muffler from the engine block by simply pulling it away. It should be able to move willingly. |