Modifications apportées à l'étape #3
Modifié par Andrew Saunders —
Modification approuvée par Andrew Saunders
- Avant
- Après
- Inchangé
Lignes de l'étape
| - | [* black] Use a socket wrench with a 7/16" hex bit or 7/16" wrench to remove the two remaining 75mm |
|---|---|
| - | [* icon_note] Make sure not to lose the metal bar linking the two |
| + | [* black] Use a socket wrench with a 7/16" hex bit or 7/16" wrench to remove the two remaining 75mm screws. |
| + | [* icon_note] Make sure not to lose the metal bar linking the two screws. |