Réparez vos affaires Communauté Boutique

Modifications apportées à l'étape #2

Modifié par Travis Tonder —

Validation en attente

Avant
Après
Inchangé

Lignes de l'étape

-[* black] adjust high and low end adjustment stops. if these are not adjusted right, the chain might fall off either end of the casset when shifting into the first and last gear. the goal is to make the range of motion of the derraillur guied sprocket to only go the range of the casset and no more
-[* black] the adjustment screws are labeled H and L. tightening each will decrease either low or high end travel and loosening the screw will increase the travel.
+[* black] Adjust high and low end adjustment stops. If these are not adjusted right, the chain might fall off either end of the casset when shifting into the first and last gear. The goal is to make the range of motion of the derraillur guided sprocket to only go the range of the casset and no more.
+[* black] The adjustment screws are labeled H and L. Tightening each will decrease either low or high end travel and loosening the screw will increase the travel.