Modifications apportées à l'étape #4
Modifié par Jonathan Fish —
- Avant
- Après
- Inchangé
Lignes de l'étape
| - | [* black] Now it's time to attach the cable to the derailleur |
|---|---|
| - | [* red] Make sure the shifter is in its highest number gear, which corresponds to the default position of the derailleur. This will make sure the cable is let out as far as possible |
| + | [* red] Shift the bike into the highest numbered gear. |
| [* green] Slide the cable through the barrel adjuster screw until the cable housing bottoms out. | |
| [* blue] Pull the slack out of the cable while clamping it down with the nut that is attached to the derailleur. | |
| - | [* |
| + | [* icon_note] By putting the shifter in the highest gear, the cable is let out as far as possible. Clamping the cable at this point ensures that all slack is removed from the line. |