Réparez vos affaires Communauté Boutique

Modifications apportées à l'étape #6

Modifié par aaron thielk —

Validation en attente

Avant
Après
Inchangé

Lignes de l'étape

[* black] now you we need to fine tune the derailleur. use the barrel adjuster located where the cable and cable housing meet the derailleur.
-[* black] loosening the barrel adjuster screw will effectively pull in the cable causing the derailleur to slightly move over to a larger gear.
-[* black] position the guied sprocket so it is right under the smallest gear. then shift through all the rest of the gears while pedaling. the derailur should shift one gear everytime you shift up or down on the shifter.
+[* black] loosening the barrel adjuster screw will effectively pull in the cable causing the derailleur to slightly move over to a larger gear. start with quarter or half turns.
+[* black] using the barrel adjustment screw, position the guide sprocket so it is right under the smallest gear. then shift through all the rest of the gears while pedaling. the derailur should shift one gear everytime you shift up or down on the shifter.
[* black] repeat the previous step until the derailleur shifts smoothly and makes a minimal amount of noise.