Aller au contenu principal

Modifications apportées à l'étape #8

Modifié par Terrence

Modification approuvée par Terrence

Avant
Après
Inchangé

Lignes de l'étape

-[* black] Use a pair of tweezers to disconnect both antennas from their sockets on the wireless card. These are snap-on connectors, much like those on a 9V. battery; pull them straight up to snap them off the studs on the card.
+[* red] Use a pair of tweezers to disconnect both antennas from their sockets on the wireless card. These are snap-on connectors, so simply pull them straight up to snap them off the studs on the card.
[* icon_caution] Be careful to pull on the contacts and not the wires. The crimps used to hold them to the wires are delicate.

Image 1

Ancienne version

Nouvelle version

Image 2

Ancienne version

Nouvelle version