Menu 

Vos paramètres

Modifications apportées à l'étape #2

Modifié par Terrence —

Modification approuvée par Terrence

Supprimé
Ajouté
Inchangé

Lignes de l'étape

[* red] Loosen the two captive screws on the right hand side of the hard drive cover. The screws will remain attached to the cover.
[* blackblue] Remove the hard drive by lifting it up vertically on the right hand side. There is usually a plastic pull tab to help. If not, try tothis does not work, gently pry it out with a flat head screwdriver.
[* blackorange] Remove the one screw under the hard drive. This will help release the motherboard infor later steps.
[* blackblue] Remove the hard drive by lifting it up vertically on the right hand side. There is usually a plastic pull tab to help. If not, try tothis does not work, gently pry it out with a flat head screwdriver.
[* blackorange] Remove the one screw under the hard drive. This will help release the motherboard infor later steps.

Image 2

Ancienne version

Nouvelle version

Image 3

Ancienne version

Nouvelle version