Aller au contenu principal

Modifications apportées à l'étape #2

Modifié par Connor

Modification approuvée par David Hodson

Supprimé
Ajouté
Inchangé

Lignes de l'étape

[* red] Loosen the two captive screws on the right hand side of the hard drive cover. The screws will remain attached to the cover.
[* black] Remove the hard drive by lifting it up vertically on the right hand side. There is usually a plastic pull tabtab to help. If not, try to gently pry it out with a flat head screwdriver.
[* black] Remove the one screw under the hard drive. This will help release the motherboard in later steps.
[* black] Remove the hard drive by lifting it up vertically on the right hand side. There is usually a plastic pull tabtab to help. If not, try to gently pry it out with a flat head screwdriver.
[* black] Remove the one screw under the hard drive. This will help release the motherboard in later steps.