Réparez vos affaires Communauté Boutique

Modifications apportées à l'étape #4

Modifié par James Loy —

Validation en attente

Avant
Après
Inchangé

Lignes de l'étape

-[* red] Locate the small blue ZIF connector on the back side of the motherboard and next to the LCD screen.
-[* black] Use Spudger to lift up the top of the blue ZIF connector piece. Slide out the ribbon (the blue ZIF connector remains attached to the motherboard).
+[* red] Hold camera at an angle to locate the small blue ZIF connector on the back side of the motherboard and next to the LCD screen.
+[* black] Use the flat end of the spudger to flip up the tab of the blue ZIF connector. Slide out the ribbon cable out.
[* black] Once the ribbon is removed the LCD screen can be rotated away from its initial position to reveal more screws underneath.
[* icon_caution] Do not pull LCD screen out or rotate past 180 degrees away from its initial position, or else you will damage the remaining ribbon that holds the LCD sceen in place.