Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Modifications apportées à l'étape #4

Modifié par James Loy

Validation en attente

Avant
Après
Inchangé

Lignes de l'étape

[* red] LocateHold camera at an angle to locate the small blue ZIF connector on the back side of the motherboard and next to the LCD screen.
[* black] Use the flat end of the spudger to lift up the top of the blue ZIF connector piece. Slide out the ribbon (the blue ZIF connector remains attached to the motherboard).
[* red] LocateHold camera at an angle to locate the small blue ZIF connector on the back side of the motherboard and next to the LCD screen.
[* black] Use the flat end of the spudger to lift up the top of the blue ZIF connector piece. Slide out the ribbon (the blue ZIF connector remains attached to the motherboard).
[* black] Once the ribbon is removed the LCD screen can be rotated away from its initial position to reveal more screws underneath.
[* icon_caution] Do not pull LCD screen out or rotate past 180 degrees away from its initial position, or else you will damage the remaining ribbon that holds the LCD sceen in place.