Aller au contenu principal

Modifications apportées à l'étape #1

Modifié par Cameron Zeller

Validation en attente

Supprimé(e)
Ajouté(e)
Inchangé

Lignes de l'étape

[* black] You should start out with your camera looking like this. You are now holding the back end of the camera and the LCD is on the rear.
[*
red] We will begin by removingUse a PH00 screwdriver to remove the single2.9 mm phillips screw on the upper left side of the case.
[* black] You should start out with your camera looking like this. You are now holding the back end of the camera and the LCD is on the rear.
[*
red] We will begin by removingUse a PH00 screwdriver to remove the single2.9 mm phillips screw on the upper left side of the case.