Modifications apportées à l'étape #5
Modifié par William —
- Avant
- Après
- Inchangé
Lignes de l'étape
| - | [* black] Remove the two screws connecting the logic board to the frame of the camera |
|---|---|
| - | [* black] Disconnect the ribbon at the bottom of the main board, as indicated in the picture, by rotating the brown connector upwards and pulling the ribbon out |
| + | [* black] Remove the two screws connecting the logic board to the frame of the camera. |
| + | [* black] Disconnect the ribbon at the bottom of the main board, as indicated in the picture, by rotating the brown connector upwards and pulling the ribbon out. |
| [* black] If the flash is not removed, remove the right most square connector at the bottom of the camera. Grab the connector with two fingers and pull upwards till it detaches. |