Modifications apportées à l'étape #5
Modifié par Jacob Abrego —
Modification approuvée par Jacob Abrego
- Avant
- Après
- Inchangé
Lignes de l'étape
| - | [* black] Place the camera |
|---|---|
| - | [* red] Disconnect the ribbon at the bottom of the main board by flipping up the brown ZIF connector and sliding the ribbon out. |
| - | [* icon_note] Note: Tweezers are recommended to perform this step. |
| - | [* blue] Remove the right most square connector at the bottom of the camera by flipping up the connector with two fingers until it detaches. |
| - | [* violet] Locate and remove the white rubber cover on the microphone. |
| - | [* icon_note] Note: Be sure not to lose the white rubber cover for the microphone. |
| + | [* black] Place the camera backward so that the lens is facing up. |
| + | [* red] Disconnect the ribbon at the bottom of the main board by flipping up the brown ZIF connector and sliding the ribbon out. |
| + | [* icon_note] Note: Tweezers are recommended to perform this step. |
| + | [* blue] Remove the right most square connector at the bottom of the camera by flipping up the connector with two fingers until it detaches. |
| + | [* violet] Locate and remove the white rubber cover on the microphone. |
| + | [* icon_note] Note: Be sure not to lose the white rubber cover for the microphone. |