Modifications apportées à l'étape #7
Modifié par William —
- Avant
- Après
- Inchangé
Lignes de l'étape
| + | [* black] Use a paperclip and bend one of the ends to form a prying tool. |
|---|---|
| + | [* black] Insert the end of the paperclip to maneuver the ribbon out of its connector. Be careful when applying pressure to not tear the ribbon. |
| + | [* black] Also, remove the square connector at the top of the logic board as indicated in the picture. Grab this connector with two fingers and pull upwards till it detaches. |
Image 1
Aucune image précédente
Ajouté