Réparez vos affaires Communauté Boutique

Modifications apportées à l'étape #7

Modifié par BAM5 —

Modification approuvée par David Hodson

Avant
Après
Inchangé

Lignes de l'étape

-[* black] Use a paperclip and bend one of the ends to form a prying tool.
-[* red] Insert the end of the paperclip into one of the holes located on the ends of the ribbon in order to maneuver the ribbon out of its connector. Alternate the maneuvering between both ends.
- [* icon_caution] Be careful when applying pressure to not tear the ribbon.
+[* red] Disconnect the ribbon cable coming from the lens mechanism from the ZIF socket on the motherboard. (The black plastic piece on the opposite side of the ribbon cable flips up towards the ribbon cable)
+[* black] Use a toothpick to pull the ribbon cable from the ZIF socket using the holes in the ribbon cable.
+[* icon_note] This step has been edited. The pictures do not show the proper removal of the ribbon cable. You should first flip up the ZIF locking mechanism before removing the cable.