Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Modifications apportées à l'étape #1

Modifié par Kevin Tremaine

Modification approuvée par Kevin Tremaine

Avant
Après
Inchangé

Lignes de l'étape

[* black] Determine the hole with the cross threaded or stripped screws
[* black] Determine the size of the current thread. (See Reference Chart)Threads are call out by the outer diameter, a dash, then the thread count. For example the tap shown is 1/4"-20
[* icon_note] If you are unsure of what size hole you have++The hole's outer diameter can be determined by measuring the width the screw or bolt that goes in the hole++
[* icon_note] The
threaded count can be determined by counting the number of threads in on inch of screw length
[* black] Determine the size of the current thread. (See Reference Chart)Threads are call out by the outer diameter, a dash, then the thread count. For example the tap shown is 1/4"-20
[* icon_note] If you are unsure of what size hole you have++The hole's outer diameter can be determined by measuring the width the screw or bolt that goes in the hole++
[* icon_note] The
threaded count can be determined by counting the number of threads in on inch of screw length
[* black] Select the appropriate tap size
[* icon_caution] Taps are sharp. Do not handle the teeth
[* black] Install the tap into the tap handle (See photo)

Image 2

Supprimé