Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Modifications apportées à l'étape #1

Modifié par Maria Simelton

Modification approuvée par Maria Simelton

Avant
Après
Inchangé

Lignes de l'étape

[* black] Determine which hole has the cross threaded or stripped screws.
[* black] Determine the size of the current thread. Threads are called out by the outer diameter, a dash, and then the thread count. For example the tap shown is 1/4"-20
[* icon_note] ++TheThe hole's outer diameter can be determined by measuring the width of the screw or bolt that goes into the hole++hole
[* icon_note] ++TheThe hole's outer diameter can be determined by measuring the width of the screw or bolt that goes into the hole++hole
[* icon_note] The thread count can be determined by counting the number of threads in one inch of screw length
[* black] Select the appropriate tap size
[* icon_caution] Taps are sharp. Do not handle the teeth
[* black] Install the tap into the tap handle (See photo)