Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Modifications apportées à l'étape #1

Modifié par Kristen Gismondi

Modification approuvée par Kristen Gismondi

Avant
Après
Inchangé

Lignes de l'étape

[* black] Determine which hole has the cross threaded or stripped screwsscrews.
[* black] Determine the size of the current thread. Threads are called out by the outer diameter, a dash, and then the thread count. For example, the tap shown is 1/4"-20"1/4"-20".
[* icon_note] The hole's outer diameter can be determined by measuring the width of the screw or bolt that goes into the holehole.
[* icon_note] The thread count can be determined by counting the number of threads in one inch of screw lengthlength.
[* black] Select the appropriate tap sizesize.
[* icon_caution] Taps are sharp. Do not handle the teethteeth.
[* black] Install the tap into the tap handle (See photo)photo).
[* black] Determine which hole has the cross threaded or stripped screwsscrews.
[* black] Determine the size of the current thread. Threads are called out by the outer diameter, a dash, and then the thread count. For example, the tap shown is 1/4"-20"1/4"-20".
[* icon_note] The hole's outer diameter can be determined by measuring the width of the screw or bolt that goes into the holehole.
[* icon_note] The thread count can be determined by counting the number of threads in one inch of screw lengthlength.
[* black] Select the appropriate tap sizesize.
[* icon_caution] Taps are sharp. Do not handle the teethteeth.
[* black] Install the tap into the tap handle (See photo)photo).