Historique de l'étape n° 3 de How to True a wheel

Modifications apportées à l'étape #3

Modifié par aaron thielk — 7 nov. 2010

	[* black] Select the appropriate spoke wrench to tighten or loosen the spoke.
-	[* black] Loosen the spokes that pull the rim to far and tighten the spokes on the opposite side to shift the rim over to the center.
+	[* black] Loosen the spokes that pull the rim to far and tighten the spokes on the opposite side to shift the rim over to the center. 1/2 of a turn with the spoke wrench is a good starting point.
	[* black] In the example we are tightening the red marked spokes and loosening the blue marked spokes. This will shift the rim closer to the viewer.
	[* black] Spin the wheel to check if the rim is straighter. Repeat the process for further out of roundness.