Modifications apportées à l'étape #5
Modifié par Alexander Glenn —
Modification approuvée par Alexander Glenn
- Avant
- Après
- Inchangé
Lignes de l'étape
| [* black] Place the right speaker console face up with the four speaker terminals situated above the 16 Ohm speaker like so. Make sure the red wire is connected to the far left terminal and the green wire is connected to the far right terminal; if this is not the case solder your wires into place. | |
| + | [* black] Test your headset if you had to solder any wires before moving to the next step. If your speaker is now working, good job, put your headset back together. If your speaker is not still not working continue to step 6. |