Modifications apportées à l'étape #8
Modifié par Alexander Glenn —
Modification approuvée par Alexander Glenn
- Avant
- Après
- Inchangé
Lignes de l'étape
| - | [* red] Remove the two 7 mm screws indicated in red using a PH00 screwdriver. Forcibly pry the black rubber bracket from the white rail frame. This step causes a small metal bracket inside the rail frame to be dislodged; once this happens the black rubber bracket can be reattached, but the metal bracket cannot be put back into place. |
|---|---|
| + | [* red] Remove the two 7 mm screws indicated in red using a PH00 screwdriver. |
| + | [* black] Forcibly pry the black rubber bracket from the white rail frame. This step causes a small metal bracket inside the rail frame to be dislodged; once this happens the black rubber bracket can be reattached, but the metal bracket cannot be put back into place. |
| [* black] Complete this step for the black rubber bracket located on both the right and left sides of the rail adjustment. |