Aller au contenu principal

Modifications apportées à l'étape #4

Modifié par iRobot

Modification approuvée par iRobot

Avant
Après
Inchangé

Lignes de l'étape

[* black] Using the plastic opening tool, detach the wires connected to the metal plate
[* icon_caution] When disconnecting the wires, be careful not to pull on the wires themselves. Use the plastic opening tool and the connector to disconnect it.
[* black] Use the plastic opening tool to remove wires connected to the circuit board on the far right.
-[* black] Use the tweezers to remove wires connected to the circuit board in between the two black wires.
+[* black] Use the [product|IF145-020|tweezers] to remove wires connected to the circuit board in between the two black wires.
[* black] Use the tweezers to press the release tab on the front and back of the plastic white wire head.
[* black] Once the tab is pressed on both sides, lift up to slide wire head out of socket.