Modifications apportées à l'étape #2
Modifié par Marlena Perez —
Modification approuvée par Marlena Perez
- Avant
- Après
- Inchangé
Lignes de l'étape
| - | [* black] |
|---|---|
| + | [* black] Remove the circuit board. Gently pull the the attached connector to unplug it form the circuit board using the plastic opening tool. |
| [* icon_caution] Do not pull on the wires themselves! Instead use the connector itself to unplug as shown. | |
| - | [* black] |
| + | [* black] Replace the broken circuit board with a new one. |