Modifications apportées à l'étape #2
Modifié par Mike Bolton —
Modification approuvée par Mike Bolton
- Avant
- Après
- Inchangé
Lignes de l'étape
| - | [* black] Insert wisdom here. |
|---|---|
| + | [* black] Once all of the screws are removed, the cover can be taken off using a metal spudger. |
| + | [* red] There are 8 more XXXX screws holding the circuit board in place that will need to be removed. |
| + | [* black] Once the screws are removed, a plastic spudger can be used to carefully move the circuit board away from the device. |
| + | [* icon_caution] There will be 3 wires connected to the opposite side of the circuit board. Be careful not to pull the board out of the device too far and damage these wires. |