Aller au contenu principal

Modifications apportées à l'étape #3

Modifié par Nick Hilzendeger

Modification approuvée par Nick Hilzendeger

Avant
Après
Inchangé

Lignes de l'étape

-[* black] Carefully remove the back cover using a plastic prying tool against the grooves along the sides of the iPAQ.
-[* black] At this point, a yellow ribbon will be connecting both the front and back panels of the device. Carefully use the prying tool to detach the ribbon from the connector pins.
+[* black] Carefully remove the back cover using the plastic opening tool against the grooves along the sides of the iPAQ.
+[* black] At this point, a yellow ribbon will be connecting both the front and back panels of the device. Carefully use the plastic opening tool to detach the ribbon from the connector pins.