Historique de l'étape n° 3 de Capresso Perfectea 260 Control System Replacement

Modifications apportées à l'étape #3

Modifié par Kenji Anzai — 28 mai 2015

Modification approuvée par Kenji Anzai

	[* red] Find the cable that attaches the small computer chip to the heating element connections.
-	[* black] Use the spudger to cut open the rubber coating at the ~~connection point~~.
-	[* black] Insert the spudger into the rectangular hole on the ~~clamp~~ and push toward the tab (away from the wire) to unbend the tab.
-	[* black] Push the ~~clamp~~ off the tab with the spudger.
+	[* black] Use the spudger to cut open the rubber coating on the latch where it clamps onto the copper tab.
+	[* black] Insert the metal spudger into the rectangular hole on the latch and push toward the tab (away from the wire) to unbend the tab.
+	[* black] Push the latch off the tab with the spudger.
	[* icon_caution] The tab will come loose suddenly. Make sure that you apply force in a controlled manner to avoid injuring yourself or damaging the other components.