Aller au contenu principal

Modifications apportées à l'étape #1

Modifié par Matthew Newsom

Validation en attente

Supprimé(e)
Ajouté(e)
Inchangé

Lignes de l'étape

[* black] Lift the home bar up as high as it will go before bendinggo.
[* icon_caution] Try to bend
the small tab under the silver rimrim as little as possible it the following steps. The more you bend, the more likely it will snap.
[* black] Lift the home bar up as high as it will go before bendinggo.
[* icon_caution] Try to bend
the small tab under the silver rimrim as little as possible it the following steps. The more you bend, the more likely it will snap.
[* black] Twist the home bar counter clockwise while carefully lifting it further. The left edge has to lift over the black plastic frame to allow it to rotate.
[* black] The home bar should now lift out of the PSP 300xc.