Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Modifications apportées à l'étape #3

Modifié par Matthew Newsom

Validation en attente

Avant
Après
Inchangé

Lignes de l'étape

[* black] Using a fingernail or spudger, flip up the retaining bracketflap on the following three ZIF connectors.
[* black] Using a fingernail or spudger, flip up the retaining bracketflap on the following three ZIF connectors.
[* red] Action button contact pad ribbon
[* orange] UMD laserdrive ribbon
[*

[* icon_caution] Be sure you are prying up on the retaining flap, not the socket itself
[*
yellow] Use your fingernail or tip of a spudger to push both sides of the black retaining flap on the UMD drivelaser ribbon socket to the right.
[* black] After flipping up the locking tabs on all three connectors, useUse your fingers or a spudger to gently pull theall three ribbon cables straight out of the connectorstheir sockets.
[* orange] UMD laserdrive ribbon
[*

[* icon_caution] Be sure you are prying up on the retaining flap, not the socket itself
[*
yellow] Use your fingernail or tip of a spudger to push both sides of the black retaining flap on the UMD drivelaser ribbon socket to the right.
[* black] After flipping up the locking tabs on all three connectors, useUse your fingers or a spudger to gently pull theall three ribbon cables straight out of the connectorstheir sockets.

Image 1

Ancienne version

Nouvelle version