Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Modifications apportées à l'étape #3

Modifié par Matthew Newsom

Validation en attente

Avant
Après
Inchangé

Lignes de l'étape

[* black] Using a fingernail or spudger, flip up the retaining flap on the following three ZIF connectors.
[* red] Action button contact pad ribbon
[* orange] UMD drive ribbon
[* icon_caution] Be sure you are prying up on the retaining flap, not the socket itselfitself.
[* icon_caution] Be sure you are prying up on the retaining flap, not the socket itselfitself.
[* yellow] Use your fingernail or tip of a spudger to push both sides of the black retaining flap on the UMD laser ribbon socket to the right.
[* black] Use your fingers or a spudger to gently pull all three ribbon cables straight out of their sockets.