Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Modifications apportées à l'étape #6

Modifié par decroded

Validation en attente

Avant
Après
Inchangé

Lignes de l'étape

[* red] Taking out the motherboard requires removing three Phillips screws and disconnecting the display and keypad cables.
[* black] The display cable is near the upper left edge of the battery gap. When you remove the motherboard, make sure it doesn't get caught on this connector. As you lift up the motherboard, there is
a few cables here and therehole in it through which you can slide the display connector.
[* black] The keypad cable is at the bottom of the battery gap
.
[* red] Taking out the motherboard requires removing three Phillips screws and disconnecting the display and keypad cables.
[* black] The display cable is near the upper left edge of the battery gap. When you remove the motherboard, make sure it doesn't get caught on this connector. As you lift up the motherboard, there is
a few cables here and therehole in it through which you can slide the display connector.
[* black] The keypad cable is at the bottom of the battery gap
.
[* icon_note] The design of the motherboard is peculiar to us. It is designed such that its inner perimeter encloses the battery. We've seen oddly-shaped PCBs before, but rarely do they have giant holes in the middle of them.