Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Modifications apportées à l'étape #7

Modifié par Walter Galan

Validation en attente

Avant
Après
Inchangé

Lignes de l'étape

[* icon_note] Lay the upper case on top of the upper portion of the motherboard.
[*
black] Insert wisdom hereUse your fingernail or the flat end of a spudger to flip up the retaining flap on the TouchPad cable ZIF socket.
[* icon_caution] Be sure you are prying up on the retaining flap, '''not''' the socket itself.
[* black] Pull the TouchPad ribbon cable out of its socket.
[* black] Remove the upper case from the HP Mini 1000
.
[* icon_note] Lay the upper case on top of the upper portion of the motherboard.
[*
black] Insert wisdom hereUse your fingernail or the flat end of a spudger to flip up the retaining flap on the TouchPad cable ZIF socket.
[* icon_caution] Be sure you are prying up on the retaining flap, '''not''' the socket itself.
[* black] Pull the TouchPad ribbon cable out of its socket.
[* black] Remove the upper case from the HP Mini 1000
.