Aller au contenu principal

Modifications apportées à l'étape #2

Modifié par Walter Galan

Validation en attente

Supprimé(e)
Ajouté(e)
Inchangé

Lignes de l'étape

[* black] Use the flat end of a spudger to gently push the power cable from its socket.
[* icon_caution] Be sure you are pushing on the cable, '''not''' the socket itself.
[* icon_note] It is recommended to push the connector from both sides in a side-by-side rocking motion to dislodge it from its recesssocket.
[* icon_note] It is recommended to push the connector from both sides in a side-by-side rocking motion to dislodge it from its recesssocket.
[* black] Pull the power ribbon cable out of its socket.