Modifications apportées à l'étape #10
Lignes de l'étape
| + | [title] removing/ cleaning fan and cooling pads |
|---|---|
| + | [* black] in this step we will show you how to remove the fan and the cooling tubes and pads for cleaning or renewing. |
| + | [* black] there are 8 screws and 1 connector |
| + | [* black] remove the screws ( 1 screw is not on the pictures, you ll find it at the bottom of the fan) |
| + | [* black] remove the connector ( see picture 2 ) using an IC extractor |
| + | [* black] remove the cooling tubes and fan. |
| + | [* black] clean the pads using isopropyl alcohol. you will see pieces (remnants ?) of old thermal paste. |
| + | [* icon_note] if the fan itself is broken , you can replace this by removing the very tiny screws. and remove the black tape. |
Image 1
Aucune image précédente
Ajouté
Image 2
Aucune image précédente
Ajouté
Image 3
Aucune image précédente
Ajouté