Réparez vos affaires

Droit à la réparation

Pièces & Outils

Modifications apportées à l'étape #9

Modifié par Walter Galan —

Validation en attente

Avant
Après
Inchangé

Lignes de l'étape

[* icon_caution] In the following steps, you will use a heat gun to soften the adhesive securing the metal LCD frame to the front display bezel. Heat guns have the capability of producing an extremely hot jet of air, so be sure not to overheat the LCD panel.
[* black] Insert wisdom hereWith the heat gun set to low, start by heating the front display bezel near the upper left corner of the display panel.
[* icon_caution] In the following steps, you will use a heat gun to soften the adhesive securing the metal LCD frame to the front display bezel. Heat guns have the capability of producing an extremely hot jet of air, so be sure not to overheat the LCD panel.
[* black] Insert wisdom hereWith the heat gun set to low, start by heating the front display bezel near the upper left corner of the display panel.